SmallTree PEG1

Intel based PCI-Express Single Port Copper Gigabit Ethernet Server Adapter

The SmallTree PEG1 server card allows you to expand the basic network connectivity of your Power Mac G5 with PCIe, Mac Pro or Intel Xserve systems. The PEG1 card supports jumbo frames and supports full dynamic link aggregation (802.3ad). This server PCI Express card offers one 10/100/1000 Base-T ethernet port with an RJ-45 connector.

Supported Apple Platforms:
Apple Power Mac G5 with PCI Express, the Mac Pro and the Intel-based Xserve.

Technical Specifications
Features	Benefits
PCI Express	Supports the latest Apple Power Mac G5, Mac Pro and Intel-based Xserve systems
IEEE 802.3ad Compatibility	Supports Gigabit Ethernet link aggregation networking standard
Intel® 82572EI Gigabit Controller	Provides high performance, reliability, and low power use in a single integrated Gigabit Ethernet controller chip
Jumbo Frames support up to 9 KB	Increase performance through reduced overhead
TCP checksum offload in RX and TX	Provides efficiency for host processing
Interrupt Moderation	Delivers increased performance while significantly reducing CPU utilization
Gigabit speeds on Category-5 cable networks	Able to achieve Gigabit speeds on commonly deployed CAT-5 cabling without costly cable replacement
Auto-sensing, self-configuring 10/100/1000 Mbps performance	Enables migration to faster networks easily and inexpensively adapter will automatically sense when the network is able to support a faster speed, and self-configure to save IT staff time, money and server downtime
System Requirements
Mac	Power Macintosh G5 with PCI Express, Mac Pro, Intel-based Xserve with Mac OS 10.4 or later
General
Connectors	RJ-45
IEEE Standard/Network Topology	10BASE-T, 100BASE-TX, 1000BASE-T
Wiring	Cat-5, 4-pair
Cable Distance	100 meters
Jumbo Frames support	up to 16KB
Full-duplex	yes
TCP Checksum Offload	yes
Technical Features
Data Rate(s) Supported per Port	10,100,1000Mbps
Bus Type	PCI Express 1.0a
Bus Width	1x
Bus Speed	2.5 Gbps uni-directional; 5 Gbps bi-directional
Interrupt Levels	INTA
IEEE Support	802.3ab
Hardware Certifications	FCC B, UL, CE, VCCI, BSMI, CTICK, MIC
Controller Processor	Intel® 82572EI
Typical Power Consumption	3.3 W (3.3 V @ 1 A)
Operating Temperature	0 - 55ºC
Physical Dimensions
Length	12.9 cm (5.1 in)
Width	7.9 cm (3.1 in)

click for more details...

in stock

SmallTree PEG2

Intel based PCI-Express Dual Port Copper Gigabit Ethernet Server Adapter

The SmallTree PEG2 server card allows you to expand the network connectivity of your Power Mac G5 with PCIe, Mac Pro or Intel Xserve systems. Use the PEG2 card to get an immediate performance increase on large transfers when connecting to other network devices that support jumbo frames or to simply connect to more networks. When used in conjunction with the built-in ports and Mac OS 10.4 (and later) built-in link aggregation software these cards provide increased network bandwidth, transparent load balancing among the ports, and transparent fail over if one or more ports or cables become disabled.

Supported Apple Platforms:
Apple Power Mac G5 with PCI Express, the Mac Pro and the Intel-based Xserve.

Technical Specifications
Features	Benefits
PCI Express	Supports the latest Apple Power Mac G5, Mac Pro and Intel-based Xserve systems
IEEE 802.3ad Compatibility	Supports Gigabit Ethernet link aggregation networking standard
Intel® 82572EI Gigabit Controller	Provides high performance, reliability, and low power use in a single integrated Gigabit Ethernet controller chip
Jumbo Frames support up to 9 KB	Increase performance through reduced overhead
TCP checksum offload in RX and TX	Provides efficiency for host processing
Interrupt Moderation	Delivers increased performance while significantly reducing CPU utilization
Gigabit speeds on Category-5 cable networks	Able to achieve Gigabit speeds on commonly deployed CAT-5 cabling without costly cable replacement
Auto-sensing, self-configuring 10/100/1000 Mbps performance	Enables migration to faster networks easily and inexpensively adapter will automatically sense when the network is able to support a faster speed, and self-configure to save IT staff time, money and server downtime
System Requirements
Mac	Power Macintosh G5 with PCI Express, Mac Pro, Intel-based Xserve with Mac OS 10.4 or later
General
Connectors	RJ-45
IEEE Standard/Network Topology	10BASE-T, 100BASE-TX, 1000BASE-T
Wiring	Cat-5, 4-pair
Cable Distance	100 meters
Jumbo Frames support	up to 16KB
Full-duplex	yes
TCP Checksum Offload	yes
Technical Features
Data Rate(s) Supported per Port	10,100,1000Mbps
Bus Type	PCI Express 1.0a
Bus Width	1x
Bus Speed	2.5 Gbps uni-directional; 5 Gbps bi-directional
Interrupt Levels	INTA
IEEE Support	802.3ab
Hardware Certifications	FCC B, UL, CE, VCCI, BSMI, CTICK, MIC
Controller Processor	Intel® 82572EI
Typical Power Consumption	3.3 W (3.3 V @ 1 A)
Operating Temperature	0 - 55ºC
Physical Dimensions
Length	12.9 cm (5.1 in)
Width	7.9 cm (3.1 in)

click for more details...

in stock

SmallTree PEG4

Intel based PCI-Express Quad Port Copper Gigabit Ethernet Server Adapter

The SmallTree PEG4 server card allows you to expand the network connectivity of your Intel Mac systems. The PEG4 provides the ability to significantly increase the network bandwidth of your system, enabling you to support larger projects effortlessly. The PEG4 card supports jumbo frames, flow control and VLAN features which provide further improvements in performance with low CPU utilization. The PEG4 Gigabit Ethernet ports will support Mac OS X's built-in link aggregation software in combination with the internal Gigabit Ethernet ports of the system. The PEG4 will transparently load balance among all linked Gigabit Ethernet the ports and seamlessly fail over if one or more ports or cables become disabled. Must be using OS X 10.4.11 or later.

Supported Apple Platforms:
Apple Power Mac G5 with PCI Express, the Mac Pro and the Intel-based Xserve.

Technical Specifications
Features	Benefits
Supports Apple Power Mac G5 with PCI Express slots, Mac Pro and Intel Xserve systems.	Enables expansive solutions across these Mac platforms.
Two Intel® 82571GB Gigabit Controllers	Enables four Gigabit Ethernet connections on a single adapter, delivering increased bandwidth for slot-constrained servers and providing high performance, reliability, and low power use in two single, integrated, dual port PCI Express Gigabit Ethernet controller chips.
Interrupt moderation	Delivers increased performance while significantly reducing CPU utilization.
Compatible with x4, x8, and x16 full-height PCI Express slots	Allows quad-port operation in almost any PCI Express server slot, except x1 slots, and allows each port to operate without interfering with the other.
TCP checksum offload in RX and TX	Provides efficiency for host processing
Interrupt Moderation	Delivers increased performance while significantly reducing CPU utilization
Category-5 unshielded twisted pair (UTP) 4-pair cabling	Uses pre-existing 4-pair cabling and saves re-wiring cost.
RoHS compliant, lead-free technology	Allows lower power consumption,remote wake and remote booting.
System Requirements	Power Mac G5 with PCI Express slots, Mac Pro and Intel Xserve running OS 10.4.11 or later
Connectors	Four RJ-45
Wiring	Category-5, unshielded twisted pair (UTP), 4-pair
IEEE Standard/Network Topology	10BASE-T,100BASE-TX,1000BASE-T
Intel Lead-free Technology	Yes
Auto-negotiation Full-duplex Capable	Yes
Integrated media access control (MAC) and physical layer (PHY)	Yes
Includes a full-height bracket (does not include a low-profile bracket)	Yes
RoHS	Yes
Cable distance	100 m in Category-5 for 100/1000 Mbps and Category-3 for 10 Mbps
Advanced configuration and power interface (ACPI) 1.0 power management	Yes
Wake on LAN support over PCI Express PXE 2.0 enabled through boot read-only memory (ROM)	Yes
Adapter fault tolerance (AFT)	Yes
Switch fault tolerance (SFT)	Yes
Adaptive load balancing (ALB)	Yes
Fast Ether Channel (FEC)	Yes
Gigabit EtherChannel (GEC)	Yes
Teaming support	Scales up to 8 connections
Multiple teams	Supports 4 separate teams, maximum
IEEE 802.3ad (link aggregation control protocol)	Yes
PCIe Hot Plug Active peripheral component interconnect (PCI)	Yes
IEEE 802.1Q VLANs	Yes
IEEE 802.3 (z, ab, u, x) flow control support	Yes
TCP checksum offload transmission control protocol (TCP), user datagram protocol (UDP), Internet protocol (IP)	Yes
IEEE 802.1p	Yes
TCP segmentation/large send offload	Yes
Interrupt moderation	Yes
Data rate(s) supported per port	10, 100, and 1000 Mbps
Bus type	PCI Express 1.0a
Bus width	x4 lane PCI Express, operable in x4, x8, x16 slots
Bus speed (x4, encoded rate)	10 Gbps uni-directional; 20 Gbps bi-directional
EEPROM-SPI and single EEPROM support	Yes
Interrupt levels	INTA
IEEE support	802.3ab
Hardware certifications	FCC B, UL, CE, VCCI, BSMI, CTICK, MIC
Controller-processor	Intel 82571GB
Typical power consumption	12.096 W (12 V @ 1.008 A)
Operating temperature	0° - 55° C
LEDs	4 (1/port, link and speed) solid and blinking
Physical Dimensions
Length	16.32 cm (6.425 in)
Width	11.12 cm (4.376 in)
Height of end bracket	12.09 cm (4.76 in)

click for more details...

in stock

SmallTree PE2G6I

Intel based PCI-Express Six Port Copper Gigabit Ethernet Server Adapter

The SmallTree PE2G6I server card allows you to expand the network connectivity of your Intel Mac systems. The PE2G6I card provides the ability to significantly increase your network bandwidth of your system, enabling you to support larger projects effortlessly. The PE2G6I card supports jumbo frames, flow control and VLAN features which provide further improvements in performance with low CPU utilization. The PE2G6I Gigabit Ethernet ports support Mac OS X's built-in link aggregation software in combination with the internal Gigabit Ethernet ports of the system. The PE2G6I will transparently load balance among all linked ports, and seamlessly fail over if one or more ports or cables become disabled. Must be using OS X 10.5.8 or later.

Supported Apple Platforms:
Apple Mac Pro and the Intel-based Xserve.

Technical Specifications
Features	Benefits
Supports Apple Mac Pro and Intel Xserve systems.	Enables expansive solutions across these Mac platforms.
Three Intel® 82571GB Gigabit Controllers	Enables six Gigabit Ethernet connections on a single adapter, delivering increased bandwidth for slot-constrained servers and providing high performance, reliability, and low power use in two single, integrated, dual port PCI Express Gigabit Ethernet controller chips.
Interrupt moderation	Delivers increased performance while significantly reducing CPU utilization.
Compatible with x8, and x16 full-height PCI Express slots	Allows six-port operation in almost any PCI Express server slot, except x1 and x4 slots, and allows each port to operate without interfering with the other.
TCP checksum offload in RX and TX	Provides efficiency for host processing
Interrupt Moderation	Delivers increased performance while significantly reducing CPU utilization
Category-5 unshielded twisted pair (UTP) 4-pair cabling	Uses pre-existing 4-pair cabling and saves re-wiring cost.
RoHS compliant, lead-free technology	Allows lower power consumption,remote wake and remote booting.
System Requirements	Mac Pro or Intel Xserve running OS 10.5.8 or later
Connectors	Six RJ-45
Wiring	Category-5, unshielded twisted pair (UTP), 4-pair
IEEE Standard/Network Topology	10BASE-T,100BASE-TX,1000BASE-T
Intel Lead-free Technology	Yes
Auto-negotiation Full-duplex Capable	Yes
Integrated media access control (MAC) and physical layer (PHY)	Yes
Includes a full-height bracket (does not include a low-profile bracket)	Yes
RoHS	Yes
Cable distance	100 m in Category-5 for 100/1000 Mbps and Category-3 for 10 Mbps
Advanced configuration and power interface (ACPI) 1.0 power management	Yes
Wake on LAN support over PCI Express PXE 2.0 enabled through boot read-only memory (ROM)	Yes
Adapter fault tolerance (AFT)	Yes
Switch fault tolerance (SFT)	Yes
Adaptive load balancing (ALB)	Yes
Fast Ether Channel (FEC)	Yes
Gigabit EtherChannel (GEC)	Yes
Teaming support	Scales up to 8 connections
Multiple teams	Supports 6 separate teams, maximum
IEEE 802.3ad (link aggregation control protocol)	Yes
PCIe Hot Plug Active peripheral component interconnect (PCI)	Yes
IEEE 802.1Q VLANs	Yes
IEEE 802.3 (z, ab, u, x) flow control support	Yes
TCP checksum offload transmission control protocol (TCP), user datagram protocol (UDP), Internet protocol (IP)	Yes
IEEE 802.1p	Yes
TCP segmentation/large send offload	Yes
Interrupt moderation	Yes
Data rate(s) supported per port	10, 100, and 1000 Mbps
Bus type	PCI Express 2.0
Bus width	x8 lane PCI Express, operable in x8, x16 slots
Bus speed (x8, encoded rate)	10 Gbps uni-directional; 20 Gbps bi-directional
EEPROM-SPI and single EEPROM support	Yes
Interrupt levels	INTA
IEEE support	802.3ab
Hardware certifications	FCC B, UL, CE, VCCI, BSMI, CTICK, MIC
Controller-processor	Intel® 82571GB
Typical power consumption	12.096 W (12 V @ 1.008 A)
Operating temperature	0° - 55° C
LEDs	4 (1/port, link and speed) solid and blinking
Physical Dimensions
Length	16.32 cm (6.425 in)
Width	11.12 cm (4.376 in)
Height of end bracket	12.09 cm (4.76 in)

click for more details...

in stock

SmallTree PEG1F

Intel based PCI-Express Single Port Fiber Gigabit Ethernet Server Adapter

The SmallTree PEG1F card provides a single optical Gigabit Ethernet port allowing you to connect to optical networks from your Intel Mac system. The PEG1F card supports jumbo frames which provides an immediate performance increase on large transfers. The PEG1F Gigabit Ethernet port will support Mac OS X's built in link aggregation in combination with the internal Gigabit Ethernet ports of the system. The PEG1F will operate transparently with non optical Gigabit Ethernet ports ensuring that no application changes are required. The optical output of the PXG1F will support standard Gigabit Ethernet connections of up to 550 meters. Must be using OS X 10.4.11 or later.

Supported Apple Platforms:
Apple Power Mac G5 with PCI Express, the Mac Pro and the Intel-based Xserve.

Features	Benefits
PCI Express	Supports the latest Apple Power Mac G5, Mac Pro and Intel-based Xserve systems
IEEE 802.3ab Compatibility	Supports Gigabit Ethernet industry-wide networking standard
Intel® 82572EI Gigabit Controller	Provides high performance, reliability, and low power use in a single integrated Gigabit Ethernet controller chip
Jumbo Frames support up to 16 KB	Increase performance through reduced overhead
TCP checksum offload in RX and TX	Provides efficiency for host processing
Interrupt Moderation	Delivers increased performance while significantly reducing CPU utilization
LC Connectors	This new, smaller connector design is compatible with the latest fiber-optic cabling standards
1000BASE-SX Multi-Mode Fiber	Ensures compatibility with fiber-optic cable lengths up to 550 meters
System Requirements
Mac	Power Macintosh G5 with PCI Express, Mac Pro, Intel-based Xserve with Mac OS 10.4 or later
General
Connectors	LC
IEEE Standard/Network Topology	1000BASE-SX
Wiring	Multi-mode fiber (62.5 µm or 50 µm)
Cable Distance	550 meters with 50 µm multi-mode fiber 275 meters with 62.5 µm multi-mode fiber
Jumbo Frames support	up to 16KB
Full-duplex	yes
TCP Checksum Offload	yes
Technical Features
Data Rate(s) Supported per Port	1000Mbps
Bus Type	PCI Express 1.0a
Bus Width	x4 lane PCI Express operable in x4, x8, x16 slots
Bus Speed	10 Gbps uni-directional 20 Gbps bi-directional
Interrupt Levels	INTA
IEEE Support	802.3z
Hardware Certifications	FCC B, UL, CE, VCCI, BSMI, MIC
Controller ?Processor	Intel® 82572EI
Typical Power Consumption	3.3 W (3.3 V @ 1 A)
Operating Temperature	0 - 55ºC
Physical Dimensions
Length	12.95 cm (5.1 in)
Width	12.0 cm (4.725 in)

click for more details...

Currently this product is not in stock.
It will only be ordered on demand and will be shipped approx. one week after receipt of order.
Please note, that if you order now, your PayPal account or credit card will be charged immediately.

SmallTree PEG2F

Intel based PCI-Express Dual Port Fiber Gigabit Ethernet Server Adapter

The SmallTree PEG2F card provides two optical Gigabit Ethernet ports allowing you to connect to optical networks from your Intel Mac system. The PEG2F supports jumbo frames which provides an immediate performance increase on large transfers. The PEG2F Gigabit Ethernet ports will support OS X's built-in link aggregation software in conjunction with the internal Gigabit Ethernet ports of the system. The PEG2F will operate transparently with non optical Gigabit Ethernet ports ensuring that no application changes are required. The optical output of the PEG2F will support standard Gigabit Ethernet connections of up to 550 meters. Must be using OS X 10.4.11 or later.

Supported Apple Platforms:
Apple Power Mac G5 with PCI Express, the Mac Pro and the Intel-based Xserve.

Technical Specifications
Features	Benefits
PCI Express	Supports the latest Apple Power Mac G5, Mac Pro and Intel-based Xserve systems
IEEE 802.3ab Compatibility	Supports Gigabit Ethernet industry-wide networking standard
Intel® 82572EI Gigabit Controller	Provides high performance, reliability, and low power use in a single integrated Gigabit Ethernet controller chip
Jumbo Frames support up to 16 KB	Increase performance through reduced overhead
TCP checksum offload in RX and TX	Provides efficiency for host processing
Interrupt Moderation	Delivers increased performance while significantly reducing CPU utilization
LC Connectors	This new, smaller connector design is compatible with the latest fiber-optic cabling standards
1000BASE-SX Multi-Mode Fiber	Ensures compatibility with fiber-optic cable lengths up to 550 meters
System Requirements
Mac	Power Macintosh G5 with PCI Express, Mac Pro, Intel-based Xserve with Mac OS 10.4 or later
General
Connectors	LC
IEEE Standard/Network Topology	1000BASE-SX
Wiring	Multi-mode fiber (62.5 µm or 50 µm)
Cable Distance	550 meters with 50 µm multi-mode fiber 275 meters with 62.5 µm multi-mode fiber
Jumbo Frames support	up to 16KB
Full-duplex	yes
TCP Checksum Offload	yes
Technical Features
Data Rate(s) Supported per Port	1000Mbps
Bus Type	PCI Express 1.0a
Bus Width	x4 lane PCI Express operable in x4, x8, x16 slots
Bus Speed	10 Gbps uni-directional 20 Gbps bi-directional
Interrupt Levels	INTA
IEEE Support	802.3z
Hardware Certifications	FCC B, UL, CE, VCCI, BSMI, MIC
Controller ?Processor	Intel® 82572EI
Typical Power Consumption	3.3 W (3.3 V @ 1 A)
Operating Temperature	0 - 55ºC
Physical Dimensions
Length	12.95 cm (5.1 in)
Width	12.0 cm (4.725 in)

click for more details...

Currently this product is not in stock.
It will only be ordered on demand and will be shipped approx. one week after receipt of order.
Please note, that if you order now, your PayPal account or credit card will be charged immediately.

SmallTree PEG6SFP

Intel based PCI-Express 6 Port Copper Gigabit Ethernet Server Adapter

The SmallTree PEG6SFP server card allows you to expand the network connectivity of your Intel Mac system.
It provides the additional benefit of providing both optical or copper Gigabit Ethernet ports from a single PCI Express slot in the system.
The PEG6SFP card provides the ability to significantly increase your network bandwidth of your system, enabling you to support larger projects effortlessly.

The PEG6SFP will support your mixed network configurations with jumbo frames, flow control and VLAN feature support providing further improvements in performance and low CPU utilization. The PEG6SFP Gigabit Ethernet ports support OS X's built-in link aggregation software in combination with internal Gigabit Ethernet ports of the system. The PEG6SFP will transparently load balance all linked ports and seamlessly fail over if one or more ports of cables become disabled. Must be using OS X 10.4.11 or later.

Supported Apple Platforms:
Apple Power Mac G5 with PCI Express, the Mac Pro and the Intel-based Xserve.

The PEG6SFP is a gigabit Ethernet adapter offering six independent SFP channels in a single PCI Express slot.

Ideally suited for space constrained network appliances and servers, it offers maximum port density and extracts the maximum network throughput from today's high-end server motherboards.

Six independent 10/100/1000Base-T Gigabit Ethernet transceivers PCI Express, x8 physical connector Operates in x8, x16 routed slots IEEE 802.3ab compliance Intel 82546 Ethernet controllers RoHS Compliant Driver Support for Mac OS X, Linux and Windows Operating systems Features Benefits Six Independent SFP Gigabit Ethernet Channels Highest port density in a standard PCI Express Slot Small Form Pluggable (SFP) Transceivers Flexibility to mix and match any combination of multi-mode, single-mode or copper media Supports PCI Express x8 signaling Maximum performance from PCI Express motherboards Based on Intel 82546 Ethernet Controllers Native driver support for all popular operating systems IEEE 802.3ab compliance Support gigabit Ethernet industry standard Ultra Deep 64KB Packet Buffer per Channel Lowers CPU utilization and minimizes congestion Large Send Off-load & TCP Segmentation Off-load Enables near wire-speed performance with low CPU utilization.

Compatible with Large Send Off-load feature in Windows Server 2003, 2000, and XP Interrupt Moderation Delivers high performance with lower CPU utilization.

Technical Specifications
System Requirements
Mac	Power Macintosh G5 with PCI Express, Mac Pro, Intel-based Xserve with Mac OS 10.4.11 or later
General
Connector type	(6) Hot-Pluggable SFP, LC and RJ-45
Network Topology	1000BASE-SX, 1000BASE-LX, 1000BASE-T, Auto Negotiating
Slot Type	PCI Express x8, rev 1.0a
IEEE Compliance	802.3z, 802.3ad, 802.1q, 802.3x, 802.1p
Onboard Cache Memory	384 KB (64 KB/port)
Ethernet Controllers	(3) Intel 82546EB
Status LEDs	Link Active, Link Activity, Link Rate
Operating System Support
	Mac OS 10.4.11 and higher- Windows Server 2003 and 2000 Windows XP, 32 & 64 bit, Windows NT Linux 2.4x or later, 32 bit & 64 bit FreeBSD 4.x or Later NetBSD 1.6x or later Novell Netware 4.11 or later Solaris 7 or later UnixWare 7.x OpenUNIX 8 (ddl8) SCO5
Advanced Features
	Adapter Fault Tolerance Switch fault Tolerance Adaptive Load Balancing PCI Hot Plug and Active PCI 802.3AD Link Aggregation Control 802.1Q VLAN Tagging 802.3x Flow Control 802.1p Class of Services TCP Checksum Offload CP Segmentation Offload Interrupt Moderation
Physical Dimensions
Form Factor	Short Card PCI
Length	16.7 cm (6.58 in)
Height	11.0 cm (4.33 in)
Environmental
Operating Temperature	-0 to 55 °C with 250 LFM airflow
Storage Temperature	140 to 70 °C
Operating Humidity	5 to 85 % non-condensing
Storage Humidity	0 to 85 % non-condensing
Power Consumption	18W max.
Please Note:
When used in Intel-based Xserves, one port on this card may be partially blocked, making cable connections tight.

click for more details...

Currently this product is not in stock.
It will only be ordered on demand and will be shipped approx. one week after receipt of order.
Please note, that if you order now, your PayPal account or credit card will be charged immediately.

SmallTree PEG34m

ExpressCard|34 Single Port Copper Gigabit Ethernet Laptop Adapter PEG34m

The SmallTree PEG34m is a 10/100/1000M Ethernet ExpressCard, which is specifically designed to plug into a MacBook Pro (or other Windows desktop or laptop) equipped with an ExpressCard 34mm slot. The PEG34m provides throughput and connectivity at gigabit speeds up to 1000 Mbps (1Gbps) raw bandwidth, that is 100 times faster than the original Ethernet, yet is compatible with existing Ethernets. It works in conjunction with the built-in Gigabit Ethernet port and supports 802.3ad link aggregation and Jumbo frames up to 9000MTU.

Some practical reasons to buy the PEG34m ExpressCard are:

you need to have a second fully functional Gigabit network for your laptop for file transfer/sharing mechanisms (e.g. iSCSI or ATA over Ethernet) that supports Jumbo frames
you need to have a backup in case your built-in port goes dead there are situations where you need a separate laptop-to-laptop connection for demos and don't have switch ports available
you need to have your physical Ethernet cable connection plugged into the left hand side of your MacBook Pro
you want to use link aggregation on your MacBook Pro it is an inexpensive investment for the above benefits!

With the innovative design of the foldable connector, the PEG34m comes with an ultra slim RJ-45 port that is only half the height of regular RJ-45 connectors, making it the thinnest ExpressCard on the market to date. It's easy and convenient to carry in your pocket, or simply to store away when not in use. The PEG34m enables you to connect your MacBook Pro via an available ExpressCard slot and your Ethernet and Gigabit network in seconds, you are networked in no time. The PEG34m also features low power-consuming device which draws power from the ExpressCard slot directly, thus no external power supply is required.

Product Features

Compliant with ExpressCard standard
Easy to read LED indicators
Express interface with 2.5 GHz signaling
Automatic MDI/MDIX crossover at all speed
Active state power management (L0s) support
Compact and robust design perfect solution for all network users, both desktop and mobile
10/100/1000M data rate auto-negotiation
Microsoft Plug-and-Play compatible
10/100/1000M IEEE 802.3 compliant
Wake On LAN (WOL) power management support
Feature full duplex mode that doubles the network connection speed
Easy Installation
Foldable connector for convenient carrying and storage
Serial Peripheral Interface (SPI) for remote boot (PXE 2.1) with Windows
High-power Bus-power - no outside power is required

Specifications
Network Specification	IEEE802.3, 802.3u and 802.3x IEEE802.3ab and 802.3z Cat3/Cat5 UTP/STP cable up to 328ft/100M
Host Interface	High-power ExpressCard Socket powered from MacBook Pro (or PC system), no external power needed Suspend power saving mode supported
LED Indicators	Link Active Status: 1Gbps: Blue 100 Mbps: Green 10Mbps: Yellow
Dimensions	34mm(W) * 108mm(D) * 5 mm (H)
EMC Certification	FCC Part 15B in US, CE EN55022/EN55024
Supported Operating Systems	Mac OS 10.4.11 or later Windows98/2000/ME/XP/Vista

click for more details...

in stock

SmallTree PETG2-CAT6

Dual Port Intel PCI Express 10Gb Ethernet Network Adapter

The Small Tree Intel-based PETG2-CAT6 server card allows you to connect your Mac systems to 10 Gigabit Ethernet capable switches and storage devices. The PETG2-CAT6 card will provide an immediate performance increase on large transfers, especially when using jumbo frames.
These cards are the ideal solution for implementing mission-critical high-powered networking applications and utilizing multiple network segment environments within high performance servers.

Must be using OS X 10.5.8 or later.

Features	Benefits
Supports Intel Mac Pro or Xserve systems	Enables expansive solutions across these Mac platforms
Intel® 82599 10 Gigabit Ethernet Controller	Industry-leading, energy-efficient design for next-generation 10 Gigabit performance and multi-core processors
MSI-X	Minimizes the overhead of interruptsAllows load balancing of interrupt handling between different cores/CPUs
Low profile	Enables higher bandwidth and throughput from standard and low-profile PCIe slots and servers
RoHS compliant 1 lead-free2 technology	Compliant with the new European Union directive (effective July 2006) to reduce the use of hazardous materials
Optimized queues: 32 Transmit (Tx) and 64 Receive (Rx) per port	Network packet handling without waiting or buffer overflow. Efficient packet prioritization
Low latency	Ability to toggle bewtween the interrupt aggregation and non-aggregation mode based on the type of data being transfered
Compatible with x8, and x16 standard and low-profile PCI Express slots	Allows each PCI Express slot to operate without interfering with each other
RJ-45 connections over category-6A cabling	Ensures compatibility with cable lengths up to 100 meters

Technical Specifications
System Requirements	Intel-based Mac Pro or Xserve Mac OS X 10.5.8 or later.
Connectors	RJ-45
Cabling	Category-6A
Ships with full-height bracket installed, low-profile bracket added in package.	Yes
Advanced packet filtering (per port)	16 exact-matched packets (unicast or multicast). 4096-bit hash filter for multicast frames. Promiscuous (unicast and multicast) transfer mode support. Optional filtering of invalid frame.
Adapter Fault Tolerance (AFT)	Yes
Switch Fault Tolerance (SFT)	Yes
Adaptive Load Balancing (ALB)	Yes
Teaming support	Yes
IEEE 802.3ad4 (link aggregation control protocol)	Yes
PCIe Hot Plug/Active Peripheral Component Interconnect (PCI)	Yes
IEEE 802.1Q VLANs	Yes
IEEE 802.3 2005 flow control support	Yes
Tx/Rx IP, TCP, & UDP checksum offloading (IPv4, IPv6) capabilities (Transmission control protocol (TCP), User Datagram Protocol (UDP), Internet Protocol (IP)	Yes
IEEE 802.1p	Yes
TCP segmentation/large send offload	Yes
MSI-X supports Multiple Independent Queues	Yes
IPv6 offloading	Checksum and segmentation capability extended to new standard packet type
Data rate supported per port	10 Gigabit
Bus type	PCI Express 2.0 (2.5 GT/s)
Bus width	x8 lane PCI Express, operable in x8 and x16 slots
Bus speed (x8, encoded rate)	20 Gbps uni-directional; 40 Gbps bi-directional
Interrupt levels	INTA, MSI, MSI-X
Hardware certifications	FCC B, UL, CE, VCCI, BSMI, CTICK, MIC
Typical power consumption	24 Watt 100LFM
Operating temperature	0° C to 55° C (32° F to 131° F)
Storage temperature	-40° C to 70° C (-40° F to 158° F
Storage humidity	90% non-condensing relative humidity at 35° C
LED Indicators	LINK (solid) and ACTIVITY (blinking)
Physical Dimensions
Length	16.74 cm (6.59 in)
Width	6.89 cm (2.71 in)
Height of end bracket	PCI Express standard is 12 cm (4.725 in). PCI Express low-profile is 7.92 cm (3.12 in).

click for more details...

in stock

SmallTree PETG2-CX4

Intel Based 10 Gb PCI Express Dual Port CX4 Copper Ethernet Server Adapter

The Small Tree Intel-based PETG2-CX4 server card allows you to connect your Mac systems to 10 Gigabit Ethernet capable switches and storage devices. The PETG2-CX4 card will provide an immediate performance increase on large transfers, especially when using jumbo frames. The distance limitation on the CX4 Copper card is 15m. These cards are the ideal solution for implementing mission-critical high-powered networking applications and utilizing multiple network segment environments within high performance servers.

Must be using OS X 10.5.8 or later.

Features	Benefits
Supports Intel Mac Pro or Xserve systems	Enables expansive solutions across these Mac platforms.
Intel® 82598EB 10 Gigabit Ethernet Controller	Industry-leading, energy-efficient design for next-generation 10 Gigabit performance and multi-core processors.
Interrupt moderation	Delivers increased performance while significantly reducing CPU utilization.
Low profile	Enables higher bandwidth and throughput from standard and low-profile PCIe slots and servers.
RoHS compliant 1 lead-free2 technology	Compliant with the new European Union directive (effective July 2006) to reduce the use of hazardous materials.
Optimized queues: 32 Transmit (Tx) and 64 Receive (Rx) per port	Network packet handling without waiting or buffer overflow. Efficient packet prioritization.
Compatible with x8, and x16 standard and low-profile PCI Express slots.	Allows each PCI Express slot port to operate without interfering with the other.
Advanced cable diagnostics	Dynamically tests and reports network problems (error rate, cable length) and automatically compensates for cable issues (cross-over cable, wrong pin-out/polarity)
CX4 connections over 8 pair, 100 Ohm, Twinaxial cabling	Ensures compatibility with cable lengths up to 15m. Supports up to 100m with Intel® Connects Cable

Technical Specifications
System Requirements	Intel-based Mac Pro or Xserve Mac OS X 10.5.8 or later.
Connectors	CX4
Cabling	8 pair, 100 Ohm, twinaxial cable. Up to 15m length.
Advanced packet filtering (per port)	16 exact-matched packets (unicast or multicast). 4096-bit hash filter for multicast frames. Promiscuous (unicast and multicast) transfer mode support. Optional filtering of invalid frame.
Adapter Fault Tolerance (AFT)	Yes
Switch Fault Tolerance (SFT)	Yes
Adaptive Load Balancing (ALB)	Yes
Teaming support	Yes
IEEE 802.3ad4 (link aggregation control protocol)	Yes
PCIe Hot Plug/Active Peripheral Component Interconnect (PCI)	Yes
IEEE 802.1Q VLANs	Yes
IEEE 802.3 2005 flow control support	Yes
Tx/Rx IP, TCP, & UDP checksum offloading (IPv4, IPv6) capabilities (Transmission control protocol (TCP), User Datagram Protocol (UDP), Internet Protocol (IP)	Yes
IEEE 802.1p	Yes
TCP segmentation/large send offload	Yes
MSI-X supports Multiple Independent Queues	Yes
IPv6 offloading	Checksum and segmentation capability extended to new standard packet type
Data rate supported per port	10 Gigabit
Bus type	PCI Express 2.0 (2.5 GT/s)
Bus width	x8 lane PCI Express, operable in x8 and x16 slots
Bus speed (x8, encoded rate)	20 Gbps uni-directional; 40 Gbps bi-directional
Interrupt levels	INTA, MSI, MSI-X
Hardware certifications	FCC B, UL, CE, VCCI, BSMI, CTICK, MIC
Typical power consumption	4.5 W (passive cables), 6.9 W (active cables)
Operating temperature	0° C to 55° C (32° F to 131° F)
Storage temperature	-40° C to 70° C (-40° F to 158° F
Storage humidity	90% non-condensing relative humidity at 35° C
LED Indicators	LINK (solid) and ACTIVITY (blinking)
Ships with full-height bracket installed, low-profile bracket added in package.	Yes
Physical Dimensions
Length	16.74 cm (6.59 in)
Width	6.89 cm (2.71 in)
Height of end bracket	PCI Express standard is 12 cm (4.725 in). PCI Express low-profile is 7.92 cm (3.12 in).

click for more details...

in stock

SmallTree PETG2NDA

Intel Based Dual Port DA 10 Gigabit PCIe Ethernet Server Adapter

Allows you to connect your Mac Pro or Intel Xserve systems to a 10 Gigabit Ethernet capable switches and storage devices.
The PETG2NDA card will provide an immediate performance increase on large transfers, especially when using jumbo frames.

Product Features

Key Features:

Support for Jumbo Frames of up to 15.5 kB
Flow Control Support
802.1q VLAN Support
TCP segmentation offload: up to 64 kB
IP/UDP Receive Checksum Offload
Message Signaled Interrupts (MSI)
Interrupt throttling control
PCIe Base Specification 2.0
Bus Width: x1, x2, x4, x8
64-bit Address Support for Systems Using More Than 4 GB of Physical Memory
Descriptor ring management hardware for transmit and receive
A mechanism for delaying/reducing transmit interrupts
Two Direct Attach (DA) ports

Technical Specifications
System Requirements	Mac Pro, Intel-based Xserve running Mac OS 10.5.8 or later.
Connectors	Two Direct Attach (DA) connectors which can either be used with SFP+ Optical SR modules Cabling: 850nm Optical Cable Max Cable Distance: 300m or Twinaxial copper cables Max Cable Distance: 8m
Network Topology	10000 BASE-SR, 10GSFP+Cu (a.k.a. Direct Attach)
IEEE Support	802.3ab, SFF-8431
Controller-Processor	Intel® 82599
Jumbo Frame Support	Up to 15.5 kB
Data rate supported per port	10 Gb/s, 1 Gb/s
Bus type	PCI Express 2.0 (2.5 GT/s)
Bus width	x8, x4, x2, x1
Bus speed	2.5 Gbps uni-directional; 5 Gbps bi-directional, per PCIe Lane
Interrupt levels	INTA
Hardware certifications	FCC B, UL, CE, VCCI, BSMI, CTICK, MIC
Typical power consumption	3.3 W (3.3 V @ 1 A)
Operating temperature	0° C to 70° C
Storage temperature	-40° C to 70° C
Storage humidity	90% non-condensing relative humidity at 35° C
LED Indicators	LINK (solid) and ACTIVITY (blinking)
Operating System	Mac OS X, Linux, Windows
Physical Dimensions
Length	16.74 cm (6.59 in)
Width	6.89 cm (2.71 in)
Height of end bracket	PCI Express standard is 12 cm (4.725 in). PCI Express low-profile is 7.92 cm (3.12 in).

click for more details...

in stock

SmallTree PETG1SFP+

Intel Based Single Port SR Optical 10 Gigabit PCIe Ethernet Server Adapter

Allows you to connect your Mac Pro or Intel Xserve systems to a 10 Gigabit Ethernet capable switches and storage devices.
The PETG1SFP+ card will provide an immediate performance increase on large transfers, especially when using jumbo frames.

Product Features

Key Features:

Support for Jumbo Frames of up to 15.5 kB
Flow Control Support
802.1q VLAN Support
TCP segmentation offload: up to 64 kB
IP/UDP Receive Checksum Offload
Message Signaled Interrupts (MSI)
Interrupt throttling control
PCIe Base Specification 2.0
Bus Width: x1, x2, x4, x8
64-bit Address Support for Systems Using More Than 4 GB of Physical Memory
Descriptor ring management hardware for transmit and receive
A mechanism for delaying/reducing transmit interrupts
One port populated with SFP+ SR optics

Technical Specifications
System Requirements	Mac Pro, Intel-based Xserve running Mac OS 10.5.8 or later.
Connectors	One SFP+ Optical SR module connector
Cabling	850nm Optical Cable
Max Cable Distance	300m
Network Topology	10000 BASE-SR, 1000 BASE-SR
IEEE Support	802.3ab
Controller-Processor	Intel® 82599
Jumbo Frame Support	Up to 15.5 kB
Data rate supported per port	10 Gb/s, 1 Gb/s
Bus type	PCI Express 2.0 (2.5 GT/s)
Bus width	x8, x4, x2, x1
Bus speed	2.5 Gbps uni-directional; 5 Gbps bi-directional, per PCIe Lane
Interrupt levels	INTA
Hardware certifications	FCC B, UL, CE, VCCI, BSMI, CTICK, MIC
Typical power consumption	3.3 W (3.3 V @ 1 A)
Operating temperature	0° C to 70° C
Storage temperature	-40° C to 70° C
Storage humidity	90% non-condensing relative humidity at 35° C
LED Indicators	LINK (solid) and ACTIVITY (blinking)
Operating System	Mac OS X, Linux, Windows
Physical Dimensions
Length	16.74 cm (6.59 in)
Width	6.89 cm (2.71 in)
Height of end bracket	PCI Express standard is 12 cm (4.725 in). PCI Express low-profile is 7.92 cm (3.12 in).

click for more details...

Currently this product is not in stock.
It will only be ordered on demand and will be shipped approx. one week after receipt of order.
Please note, that if you order now, your PayPal account or credit card will be charged immediately.

SmallTree PETG2SFP+

Intel Based Dual Port SR Optical 10 Gigabit PCIe Ethernet Server Adapter

Allows you to connect your Mac Pro or Intel Xserve systems to a 10 Gigabit Ethernet capable switches and storage devices.
The PETG2SFP+ card will provide an immediate performance increase on large transfers, especially when using jumbo frames.

Product Features

Key Features:

Support for Jumbo Frames of up to 15.5 kB
Flow Control Support
802.1q VLAN Support
TCP segmentation offload: up to 64 kB
IP/UDP Receive Checksum Offload
Message Signaled Interrupts (MSI)
Interrupt throttling control
PCIe Base Specification 2.0
Bus Width: x1, x2, x4, x8
64-bit Address Support for Systems Using More Than 4 GB of Physical Memory
Descriptor ring management hardware for transmit and receive
A mechanism for delaying/reducing transmit interrupts
Two ports populated with SFP+ SR optics

Technical Specifications
System Requirements	Mac Pro, Intel-based Xserve running Mac OS 10.5.8 or later.
Connectors	Two SFP+ Optical SR module connectors
Cabling	850nm Optical Cable
Max Cable Distance	300m
Network Topology	10000 BASE-SR, 1000 BASE-SR
IEEE Support	802.3ab
Controller-Processor	Intel® 82599
Jumbo Frame Support	Up to 15.5 kB
Data rate supported per port	10 Gb/s, 1 Gb/s
Bus type	PCI Express 2.0 (2.5 GT/s)
Bus width	x8, x4, x2, x1
Bus speed	2.5 Gbps uni-directional; 5 Gbps bi-directional, per PCIe Lane
Interrupt levels	INTA
Hardware certifications	FCC B, UL, CE, VCCI, BSMI, CTICK, MIC
Typical power consumption	3.3 W (3.3 V @ 1 A)
Operating temperature	0° C to 70° C
Storage temperature	-40° C to 70° C
Storage humidity	90% non-condensing relative humidity at 35° C
LED Indicators	LINK (solid) and ACTIVITY (blinking)
Operating System	Mac OS X, Linux, Windows
Physical Dimensions
Length	16.74 cm (6.59 in)
Width	6.89 cm (2.71 in)
Height of end bracket	PCI Express standard is 12 cm (4.725 in). PCI Express low-profile is 7.92 cm (3.12 in).

click for more details...

Currently this product is not in stock.
It will only be ordered on demand and will be shipped approx. one week after receipt of order.
Please note, that if you order now, your PayPal account or credit card will be charged immediately.

Please enter the EU VAT ID and the company name (owner of VAT ID).
EU VAT ID:
Company name: